GDSBT30CS : No Sound

If there is no sound coming from the GDSBT30CS, follow these troubleshooting tips: 

Make sure the GDSBT30CS is powered on. There will be an illuminated LED on the front right:

  • Red LED - Standby mode
  • Blue Flashing LED - Bluetooth pair mode (while the blue LED is flashing the Bluetooth receiver is waiting to connect to a Bluetooth device)
  • Blue LED (on) - Bluetooth mode - Connected.
  • White LED - AUX input mode - Connect via the red and white RCA leads.
  • Green LED - Line in mode - Connect via the 3.5 mm Jack on the side of the Soundbar.
  1. Check the volume control of the GDSBT30CS is not at a minimum.
  2. Check the GDSBT30CS is not set to mute.
  3. Make sure the GDSBT30CS is set to the correct source that corresponds to the connected input and cable.
  4. Check the connections on the TV are an AUDIO OUTPUT.
  5. Some TV's have an additional volume control setup, consult your TV's user guide.
Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request


Please sign in to leave a comment.